The PLC Trainers are
a small investment in your future. Along with some training (self taught) you
can make a very good living for yourself and your family and have a fun exciting
career. Our trainers are the perfect low cost trainer,
great for students, technical schools, colleges or company's that want to bring
their employees up to speed on PLC controls, its a complete package rolled into
one all you need a a PC.
Allen Bradley MicroLogix 1000
- Discrete I/O
(in-stock)
Automation Direct (Koyo) DL05
- Discrete I/O (in-stock)
Mitsubishi
(FX series) - Discrete I/O (in-stock limited)
Siemens S7-200
- Discrete I/O (in-stock limited) **With full version of software** MicroWIN or
without
GE Fanuc
(Series 90 Micro) - Discrete I/O (in-stock)
Automation Direct (Koyo) DL05 - Analog
Discrete combo (Sold-out)
Automation Direct (Koyo) DL05 - C-More HMI and
Discrete combo (NEW) (limited)
Siemens S7-300, Controllogix, Omron coming soon
If you are striving to get to the
next level of programming and want a low cost solution then check out the HMI
Simulators
Shipping USA FREE, Canada
$35.00, Everywhere else $45.00 (you will be invoiced the difference if not
charged at check out)
Allen Bradley Training PLC
$269.95
Model
ABS01
In Stock!
This is an Allen Bradley (Micrologix 1000) with
everything you need to start programming. Just download the software RSLogic (RS500
starter) and RSLinx (RSLinx lite) start creating your own programs.
Includes 1 PLC
(new), 1 Training Module with 4 discrete inputs and 4 discrete outputs
(2 spare inputs to be used by your discretion), power
switch, programming cable, power cable, sample programs and programming lessons.
You will be given a
procedure on how and what to download along with installation instructions RSLinx and RSLogic (lite and starter)....Not Windows Vista compatible.
You may also have loading issues if running on WinXP "Home Edition"
All wired up and
ready to go, just plug in and start programming. Include with the trainer
are programming lessons, we are going to offer these at no extra charge
to you, we are now on our 6th lesson and more to come. You can also purchase our
HMI Simulator to help you achieve your
programming goals.
AND NOW!!!
includes lessons...
We are
trying to teach you something you can not get in a manuals, the manuals are
great and you should read them
look at the bottom of our programming help page
http://www.plctrainer.net/AutomationLinks.htm but what we are teaching you
will not get out of a manual, we are trying to mimic the machines
that you will be working on or building, this is where the real value of the
lessons are... you will have a understanding on why and how the logic is
working and you will be able to come up with your own logic in no time at all.
This
is a series of lessons that is for the beginner programmer just learning how to
program and
the seasoned engineer that is looking to improve their skills, we are covering
everything from simple pointers to advanced moves and data manipulation.
We
are trying to teach you something you can not get in a manuals, the manuals are
great and you should read them, but what we are teaching you will not get out of
a manual, we are trying to mimic the machines that you will be working on or
building, this is where the real value of the lessons are... you will have a
understanding on why and how the logic is working and you will be able to come
up with your own logic in no time at all.
With over a
total of 41pages (pdf) on just the lessons and 5 .rss programs (also printed in
pdf) this will give you the knowledge that you need. These can also be converted
to any SLC CPU.
The lessons
1) Basic
intro: Download, go online, viewing program, making a simple program
2) Basic
intro: Instructions, Split Screen, Program Tree, Custom Data Monitor,
Processor Status (S2:)
3) PLC
Cycle Scan's: How the PLC's looks at the logic and decides what needs to
happen next, this is important if you plan on any 'automation', this is over
looked by many and they have a hard time understanding the full concept of
programming, the PLC’s don’t change their mind… its always the same so once you
learn how to read their mind you can tell what its going to do next.
4)
Recording actions with a PLC: (FFL’s, FFU’s, JSR’s, EQU’s, CLR’s) In this
lesson we will cover on how to record and play back (in sequence) an event or
series of actions (inputs) then play them back as outputs, we will be recording
up to 20 inputs, using FFL's and FFU's… if you are old enough you can remember
the old game Simon Says, this is similar to that by randomly pushing the
buttons/inputs then switching to the play back mode the PLC plays back the
buttons you just pushed then the same sequence you pushed them.
5) Peak HMI
(Human Machine Interface), Using a demo version of Peak HMI you will learn how
an HMI interfaces with the PLC and is controlled by your PC, HMI’s are becoming
a large part of any manufacturing/production plants, learning this is a bit more
advanced but this is a MUST for any system integrator or plant maintenance
personal, this is the next level… we are working on this one, when
it is finished you will receive it along with instructions on how to download
and setup the HMI (still in the works)
6) Parts
conveyer: (Timers, Counters, Moves, Sequence Loads, Data Viewing), Learn how
to track a part that is moving down a production line or conveyor, by tracking
parts you can determine when to remove a rejected part, speed up or slow down
line speed, run the program/machine in manual or automatic.
7) Grinder:
This lesson simulates a grinding machine by running a table up and down and into
the grinder (resurfacing grinder) it will run in automatic if the correct
conditions are made.
8) Vacuum
pump sequencing: (RTO, GEQ, MOV) This lesson we turn on and rotate vacuum
pumps depending on the wear (hrs ran) and the need from production. Pump
Sequencing, you will learn how to program a series of pumps and have them
automatically cycle on and off (one at a time), so you keep even ware on the
pumps and cycle them depending on and off depending on the pressure switch
settings, all three pumps will run if the press is not enough and cycle off as
pressure gets closer to set point, using this is they way to be introduced into
the real world of programming and trouble shooting.
Click
HERE for Lesson 8 for FREE, this is a sample
of what you will get, its one of the basic lessons but we want everyone to see
what they can learn.
You can also
see a sample screen shot of the lesson 8, this is very well documented so you
can follow the program and see the reasoning for everything.
All lessons
will be in RSLogix file format .rss, PDF and word doc. You will get a copy of
the pdf for the program (.rss) also, this makes it better to read and fallow
along with the program.
These lessons could not of been
done without the help of Ron Beaufort
www.ronbeaufort.com if you are looking for PLC training lessons in a very
professional environment then this is the place you need to visit, he is know
World wide for his teaching techniques and programming abilities.
You can also see a sample screen shot of the first lesson, this
is very well documented so you can make follow the program and see the reasoning
for everything, the first lesson is a little more advanced but we will also show
you the basics as well. Lessons will be in RSLogix file form, PDF and word doc.
Please allow 2 days for processing, $269.00
free shipping in the US (Canada 39.95 world wide 49.95)
Siemens S7-200
Training PLC
$389.95 (with software)
$259.95 (without software)
Model
SS01
This is an Siemens (S7-200) with
everything you need to start programming. Includes MicroWIN 4 this is the full
version
Includes 1 PLC, 1 Training Module with 4 discrete inputs and 4 discrete outputs, power
switch, programming cable, power cable
These are a limited series,
please inquire for shipping lead times
info@plctrainer.net
In stock, you can order with or
without the software, both ways include the USB PC/PPI communication cable
Automation Direct and CMore HMI Training PLC
$489.95
Model
ADCHMI
Limited! in stock contact us or
see our eBay store
We have not
been able to keep these in stock, if you want to be on our waiting list please
inquire
This is an Automation Direct (DL05) and
CMore HMI with
everything you need to start programming and learning
Automation
Direct is one of the best PLC's out there and becoming a large market player
very fast, due to the low cost of all of their products, support is very good
also.
You can
download software for both the HMI and PLC Programming from
www.automationdirect.com
Automation Direct Training PLC (Koyo)
$249.95
Model
ADS05
In Stock!
This is an Automation Direct (DL05) with
everything you need to start programming. Just
load the software and start programming.
Includes 1 PLC (CPU), 8 discrete inputs
and 6 discrete outputs (4 are utilized by the trainer, the others are to your
discretion) , power switch, programming cable, power cable, sample
programs, programming software (limited 100 word version).
Software can be downloaded for free from
www.automationdirect.com
Lessons coming soon! and will be included at no
cost.
** Including at no extra charge the HMI
Simulator
www.plctrainer.net/HMISimulators.htm (a $37.00 value)** you will need the
full version of the software to take full advantage of the HMI Simulator
All wired up and ready to go, just plug in and start programming.
GE Fanuc
(Series 90 Micro)
$189.95
Can't get any cheaper :)
Model
GES06
This is an GE Fanuc (Series 90 Micro)
Includes 1 PLC (CPU), 8 discrete inputs
and 6 discrete outputs (4 each are utilized by the trainer, the others are up to
your discretion), power switch and programming cable
This PLC trainer does not come with programming
software (but does include communication cable), you must have your own software
(for now)
All wired up and ready to go, just plug in and start programming.
We only have 3
left, we are not sure if we will bring them back....
Mitsubishi (FX-1s)
$289.95
(NEW)
Model
MITS07
Out of stock, expecting more in late September
This is an Mitsubishi (FX1s)
Includes 1 PLC (CPU), 6 discrete inputs
and 4 discrete outputs (you can wire the other two inputs to your discretion), power switch, programming cable (SC09), power cable, sample
programs, programming software (limited 1000 word version).
All wired up and ready to go, just plug in and start programming.
Automation Direct
Analog
Training PLC (Koyo)
$549.95
Model
ADAE06
This is an Automation Direct (DL05) with
analog
Includes 1 PLC (CPU), 4 discrete inputs
and 4 discrete outputs, 1 analog input, 1 analog output, power switch,
programming cable, power cable, sample program.
** Including at no extra charge the HMI
Simulator
www.plctrainer.net/HMISimulators.htm (a $40.00 value)**
All wired up and ready to go, just plug in and start programming.
Full version
of the software is required.
Out of stock
Warrantee/Guarantee on Trainers
These are
NEW trainers all components are NEW we will
honor manufactures warrantee on PLC's and
30day (exchange only!!) on all other parts,
if you receive a trainer that is not working
(other then programming issues), please
contact us and we will replace the trainer,
we fully test all trainers and load a small
program before shipment to test all
functions.
There are several payment methods, we can invoice you, credit
card, Paypal, email us and we will give you
the options or
Mail a check to
1000 Batesburg Hwy Saluda, SC. payable to Ind-Concepts
LLC
Click here for our fax order
form please fill
out form the fax to (864) 445-7829 (you can
also phone in your credit card number)
Please add 6%
for South Carolina residents and $19.95
shipping on all trainers (domestic only)
Ships in 1-2
days
Contact Information:
Ind-Concepts LLC 1000 Batesburg Hwy Saluda, SC 29138 Phone (803) 622-6818 Fax (864) 445-7829
The purchaser of
all trainer are responsible for all importing/duty taxes (not
applicable to domestic shipping)